Motorhome Magazine Open Roads Forum: Beginning RVing: Twist-on Sani-Con Flush Question
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Help and Support  |  Contact

Search:   Advanced Search

Search only in Beginning RVing

Open Roads Forum  >  Beginning RVing

 > Twist-on Sani-Con Flush Question

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 
Page of 2  
Next
PackerBacker

Montreal, Quebec,Canada

Senior Member

Joined: 08/22/2002

View Profile

Offline
Posted: 09/29/08 06:18am Link  |  Quote  |  Print  |  Notify Moderator

I got a chance to use the 'Sani-Con 2' flush system in our new MH for the first time yesterday, wow, what a great device; makes flushing an almost 'want to do' task.

It is the twist-on pump/motor version and it mounts (hangs down) vertically from the sewer pipe that inside the water system storage bay of MH. The bay is an enclosed area with just a screw-on cap in the floor for a sewer hose to go through. When I twisted it on it seemed to snap into place and feels very secure (feels like it won't just rotate off on it's own).

Question; can I leave the pump/motor hanging there while traveling or do I need to remove it and set it on the floor of the compartment? It is hanging off the sewer exit pipe.


Eric
2009 Holiday Rambler Admiral 33SFS
Good Sam's - FQCC/Camping Quebec - KOA
My Photos


lv2rom

Kansas City, Missouri

Senior Member

Joined: 07/12/2006

View Profile

Offline
Posted: 09/29/08 07:00am Link  |  Quote  |  Print  |  Notify Moderator

Fist of all...no one could ever make any type of flusher that would make me "almost want to use it"....that said, I wouldn't leave any extra weight hanging on a sewer pipe.....Brian


2005 F350 Dually -AFE air box/MRSP exhaust/Bags/Bilsteins/Energy Susp./Michleins
2002 Hitchhiker Fiver 29.5 RLBG - Moryde Pin/Gas shocks/Michelin XPS Ribs
1996 Layton Fiver 21ft. Totally reconditioned..Love it!!


Bumpyroad

Virginia

Senior Member

Joined: 12/01/2005

View Profile

Online
Posted: 09/29/08 07:23am Link  |  Quote  |  Print  |  Notify Moderator

lv2rom wrote:

Fist of all...no one could ever make any type of flusher that would make me "almost want to use it"....that said, I wouldn't leave any extra weight hanging on a sewer pipe.....Brian


I agree with the extra weight thing, but a macerator pump (or sewer solution) makes dumping a black tank "almost" enjoyable. cleaner, easier, no stinky slinky to sort of clean out that always leaves a few cups of dirty water in it to spill, etc.
bumpy





PackerBacker

Montreal, Quebec,Canada

Senior Member

Joined: 08/22/2002

View Profile

Offline
Posted: 09/29/08 07:53am Link  |  Quote  |  Print  |  Notify Moderator

lv2rom wrote:

Fist of all...no one could ever make any type of flusher that would make me "almost want to use it"....

Well I did say almost

... Eric

PackerBacker

Montreal, Quebec,Canada

Senior Member

Joined: 08/22/2002

View Profile

Offline
Posted: 09/29/08 07:57am Link  |  Quote  |  Print  |  Notify Moderator

Bumpyroad wrote:

...... but a macerator pump (or sewer solution) makes dumping a black tank "almost" enjoyable. cleaner, easier, no stinky slinky to sort of clean out that always leaves a few cups of dirty water in it to spill, etc.

I could kick myself for not getting one sooner when we had our 5th wheel. It's just so simple and clean.

... Eric

wa8yxm

Wherever I happen to park

Senior Member

Joined: 07/04/2006

View Profile

Offline
Posted: 09/29/08 10:44am Link  |  Quote  |  Print  |  Notify Moderator

The rules for travel require that the dump outlet be securely capped. So if you leave the motor attached you must cap or plug the outlet (i do not recall how the outlet on the sanicon is plumbed, male or female)

Second if the motor would hang down below the rest of the trailer (IE on my rig it extends through the bottom of the compartment) I would remove it and put it back in it's carry case (After proper rinsing of course) because I'd hate to get where I'm going and have busted motor/pipes and a big mess.

So my advice is remove, rinse and store Cap the outlet with the cap provided and .. If there is a screw in cover in the bottom of a compartment below it.> Screw in.

Now the regular Sani-con (Which you hook up with a short length of 3" stinky slinky) is another matter, since no part of it extends outside the rig save the hose, That one you just cap/plug the outlet.


Nothin adds excitment like something that is none of your business
Kenwood TS-2000 housed in a 2005 Damon Intruder 377


PackerBacker

Montreal, Quebec,Canada

Senior Member

Joined: 08/22/2002

View Profile

Offline
Posted: 09/29/08 01:35pm Link  |  Quote  |  Print  |  Notify Moderator

wa8yxm wrote:

... The rules for travel require that the dump outlet be securely capped. So if you leave the motor attached you must cap or plug the outlet (i do not recall how the outlet on the sanicon is plumbed, male or female)

Thanks John.

Actually it is inside the bay and does not protrude below the motorhome. The sewer outlet in the floor of the bay has a screw-in bottom plug the size of a regular dump hose. The Sani-Con has a screw on cap at the end of the hose that is only removed for 'dumping'.

... Eric

wa8yxm

Wherever I happen to park

Senior Member

Joined: 07/04/2006

View Profile

Offline
Posted: 09/29/08 04:28pm Link  |  Quote  |  Print  |  Notify Moderator

I know the regular sanicon does, his sounded more like my Flo-Jet (Same pump by the way)

However, given what I wrote, If that is the case Eric. The advice would be "user's choice" I would very likely leave it connected.

The regular sani-con system is great. Though I hardly ever use my macerator pump. When I've needed it I was very glad to have it.. (normally I use the 3" but recommend the macerator systems.. I do not recommend the hydro powered "Sewer Solutoin" jut pump system.. TOO MUCH WATER USEAGE)

eisleyr

Milton, Pa, USA

Senior Member

Joined: 09/30/2004

View Profile

Offline
Posted: 09/30/08 08:23pm Link  |  Quote  |  Print  |  Notify Moderator

Up to you if you want leave it on or take it off BUT if you decide to leave it on I would rig up some kind of support to reduce the stress on the plumbing. The pump does have some weight that could 'swing' around and put too much stress on the PVC (or ABS) pipe.


Rob & Kathy
97 Southwind
2004 Honda CR-V
Good Sam Member since 1992

wa8yxm

Wherever I happen to park

Senior Member

Joined: 07/04/2006

View Profile

Offline
Posted: 10/01/08 10:36am Link  |  Quote  |  Print  |  Notify Moderator

Eisleyer and Eric

I did a bit of research today

Sani-con has two systems in the camping world catalog

The "Regular Sanicon" I spoke of in an earlier post appears to be what Eric has, this is a box mounted system that is bolted inside the compartment and hooks to the outlet with a 3" hose, (I imagine you could not bolt it in so it would be portable)

The "Tank Buddy" is identical to my Flo-Jet and from Eric's original description that is what I assumed he had.

If it hooks up with a 3" flexible hose (Stinky Slinky) no reason to unhook it, Just cap the outlet.. IT won't stress the plumbing any

If the pump motor hooks directly to the pipes.. What Eisleyr said.

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 
Page of 2  
Next

Open Roads Forum  >  Beginning RVing

 > Twist-on Sani-Con Flush Question


Search:   Advanced Search

Search only in Beginning RVing


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:

© 2008 Motorhome Magazine | Terms & Conditions | PRIVACY POLICY | YOUR PRIVACY RIGHTS