Motorhome Magazine Open Roads Forum: Class C Motorhomes: Chip for Supernova?


	Already a member? Login here. If not, Register Today! \| Help

Newest | Active | Popular | RVing FAQ

Forum Rules | Forum Help and Support | Contact

Open Roads Forum > Class C Motorhomes > Super C

Reply to Topic | Subscribe | Print Topic | Post New Topic |

Cruzin Chris

Ohio

New Member

Joined: 01/26/2008

View Profile

Offline

Posted: 02/19/08 06:58pm

Link | Quote | Print | Notify Moderator

Is there a chip for the 08 Supernova out there??

dcwinters

North Caolina

New Member

Joined: 01/27/2008

View Profile

Offline

Posted: 02/19/08 07:43pm

Link | Quote | Print | Notify Moderator

I found this. It has a unit for a VT365 up to an 07. Which I think will work, since I believe most 08s are built on 07 chassis.

Let me know if you find any info on this. I am looking at it as well.

http://www.thoroughbreddiesel.com/ts-performance/mp8.htm

CampCook

Oregon

New Member

Joined: 02/06/2008

View Profile

Offline

Posted: 02/19/08 08:51pm

Link | Quote | Print | Notify Moderator

This is the one I have decided to go with, a buddy of mine who runs the International 4000 chassis on 3 of his delivery trucks uses their module with great results and no problems so far..

I ordered one for my new Supernova 6400 and I will post my before/after results once I have put a few miles on the new rig.

I want to load it up and get all my weights recorded and then get some kind of baseline for performance and MPG before the chip and then try to get a fair comparison after installing the chip... Won’t be scientific but I’m sure the results will be interesting..

http://www.workhorsemodule.com/RV_Truck.html

2008 SuperNova 6400
2006 Jeep Toad

tatest

Oklahoma

Senior Member

Joined: 05/14/2005

View Profile

Offline

Posted: 02/20/08 08:23pm

Link | Quote | Print | Notify Moderator

Well, in the absence of a chassis dyno, the best way to measure power gains is on the drag strip. Be sure to get some 1/4 mile timing slips before you do the upgrade

Tom Test
Itasca Spirit 29B
2001 Ranger Edge

CampCook

Oregon

New Member

Joined: 02/06/2008

View Profile

Offline

Posted: 02/20/08 08:37pm

Link | Quote | Print | Notify Moderator

Hmmm... I wonder if they make wrinkle wall dually slicks with a 6500lb weight rating??

dcwinters

North Caolina

New Member

Joined: 01/27/2008

View Profile

Offline

Posted: 03/25/08 12:47pm

Link | Quote | Print | Notify Moderator

Campcook,

Did you get your module installed? If so, how is it working?

dsomonster

Southern CA

New Member

Joined: 02/19/2008

View Profile

Offline

Posted: 03/26/08 10:48am

Link | Quote | Print | Notify Moderator

I'm interested in knowing about the gains with the chip. Does it void warranty?

dsomonster

Southern CA

New Member

Joined: 02/19/2008

View Profile

Offline

Posted: 09/29/08 01:17pm

Link | Quote | Print | Notify Moderator

Any information on how the TS unit worked with the VT365? I am very much interested.

Thanks.

az99

N.Y.

Senior Member

Joined: 12/26/2006

View Profile

Offline

Posted: 09/30/08 10:19am

Link | Quote | Print | Notify Moderator

CampCook wrote:

They do not have a listing in the Medium Duty/RV section for the VT 365. Are you using the one for the 6.0L Fords ?

SN6400

Alberta

New Member

Joined: 06/04/2008

View Profile

Posted: 10/05/08 07:53pm

Link | Quote | Print | Notify Moderator

I have tried this programmer and never seen any gains, just losses. I have been running it for 5000 miles now. To get the 300HP they say the VT365 has they have changed around the pressure on the fuel lines etc, this Workhorse Module does nothing. I am seeing better performance without the programmer. There has to be something else out here. Let me know if you find it!!

Reply to Topic | Subscribe | Print Topic | Post New Topic |

Open Roads Forum > Class C Motorhomes > Super C

	New posts		No new posts
	Closed, new posts		Closed, no new posts
	Moved, new posts		Moved, no new posts

Adjust text size: