Motorhome Magazine Open Roads Forum: First the Roof, now Side Delamination
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Help and Support  |  Contact

Search:   Advanced Search

Search only in General RVing Issues

Open Roads Forum  >  General RVing Issues

 > First the Roof, now Side Delamination

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 
Exocet

Central NY, USA

Senior Member

Joined: 04/11/2003

View Profile

Offline
Posted: 06/27/08 07:06pm Link  |  Quote  |  Print  |  Notify Moderator

Two weeks ago I noticed that I have some apparent water damage on the roof of my TT. While out mowing the grass tonight, I noticed a slight bulge above the rear, door-side window. I got up close and started pressing on it, and sure enough it's delaminated. If you don't look down the side of the TT in the right light, it's hard to see. It appears to be between the roof and the window and extending a couple of feet back.

The roof is potentially fixable. The side, I will have to live with. Hopefully, it doesn't get any worse (that's probably wishful thinking). I was not expecting anything like this with a TT that's less that 3 years old. I'm not a happy camper right now.


2008 Nissan Titan SE, Crew Cab, 4x4
Long Bed, Big Tow

2006 Rockwood 2501
Equal-i-zer
Tekonsha Prodigy


WTTCS

freedom , U.S.A.

Senior Member

Joined: 07/28/2003

View Profile


Posted: 06/27/08 07:28pm Link  |  Quote  |  Print  |  Notify Moderator

Get a syringe, fill with some type of glue, insert under the delamanated areas and squirt. That should fix it for a long time. I am sure others can tell you what the best type glue is, but I always just use a bonding agent that works on wood and fiberglass.


1997 chev crew cab 454, 5 sp. 4.10
2000 Fleetwood Caribou 11.5


mike4947

N. Syracuse, NY

Moderator

Joined: 08/26/2002

View Profile

Online
Posted: 06/27/08 08:57pm Link  |  Quote  |  Print  |  Notify Moderator

First thing is cover that area up if it looks like rain. Delamination doesn't stop, it only gets worse if more moisture is introduced. Next step is to get the area DRY before attempting any repairs. Sealing up the leaks without drying it out first will only spread the moisture and increase the delam area.


blog.rv.net Your daily guide to the Open Road

Subscribe to the daily digest

Want to sell some of your gear? -
Free Classified Listings on RV.Net


They say you learn by your mistakes, in that case I must be a genius.

Hornet28BHDS

Parker, PA

Senior Member

Joined: 01/29/2007

View Profile

Offline
Posted: 06/27/08 09:13pm Link  |  Quote  |  Print  |  Notify Moderator

Sorry to hear of your delamination! Anyone make a card for that?


2006 Hornet 28BHDS-Bunk House, Dual Slides

2006 Dodge Ram 2500 HD
5.7L Hemi, Factory Towing Package
Reese Brake Controller, WD Hitch and Sway Bar

Life is short, why not spend it in an RV!

SPRING HAS SPRUNG!


javaseuf

California's Gold Coast

Senior Member

Joined: 03/30/2005

View Profile


Posted: 06/27/08 09:16pm Link  |  Quote  |  Print  |  Notify Moderator

Also, be very careful what glue you decide to use. Usually the type of adhesive is an industrial contact cement that is sprayed on with a "cob-web" nozzle on an industrial sprayer.
Many glues will dicinegrate the foam that is used under the fiberglass.


Steve
2007 Springdale 291RKL
2003 F150 King Ranch
2001 Dodge Van w/Wheelchair Ramp
1991 Palomino Mustang PUP
Eureka Timberline Tent
Yamaha IF2400isc
Yamaha EF3000iSEBC
"Politically Incorrect And Proud Of It"


imgoin4it

Alamogordo, NM USA

Senior Member

Joined: 10/25/2004

View Profile


Posted: 06/27/08 10:25pm Link  |  Quote  |  Print  |  Notify Moderator

I wonder why gorilla glue would not work on delamination. As we all know delamination is almost always caused by water leaking and the delam area is wet. It is also near impossible to ever get dry because it is in the wall. Those who have used gorilla glue know that for many materials one glues it, is recommended you wet one or both surfaces before the glue is introduced. The glue and water foam and when ii cures it is probably the strongest glue I have ever seen. I used it to glue the rear lower end cap of a Winnebago onto the angle iron pieces that bolt the end cap to the motor home. It was better then Winnebago's glue.


Retired and loving it
Living in the Land of Enchantment
Traveling in 2007 Newmar KSDP
towing a Jeep Liberty
with a Blue Ox tow bar

Exocet

Central NY, USA

Senior Member

Joined: 04/11/2003

View Profile

Offline
Posted: 06/28/08 02:53pm Link  |  Quote  |  Print  |  Notify Moderator

It's even worse than I suspected. I got up on a ladder to check out the side delamination and noticed that the roof in that corner and the opposite corner are both delaminated as well. I now have three spots on the roof with water damage and one spot on the side. It just goes from bad to worse. The frustrating part is I had a leak test done last summer because I suspected that there might be a leak in the right, rear corner. The dealerhip found one and supposedly fixed it. There wasn't any noticable damage at the time. Either the dealer didn't get it all fixed, or new leaks developed over the winter. I'm just too depressed to deal with it right now.

Exocet

Central NY, USA

Senior Member

Joined: 04/11/2003

View Profile

Offline
Posted: 06/29/08 06:53pm Link  |  Quote  |  Print  |  Notify Moderator

Well, I got around to re-sealing all the vents, etc. with Dicor this afternoon. I took a closer look at the end caps. The screw strip only had about a 1/4" bead of Dicor on each side. Considering how much they put around all the vents, why did they skimp out on the end caps? I suspect that this is the cause of my problems. I also looked over the repair that was made last summer. The dealer put a couple of thin beads of Dicor over a couple of seams. Maybe about 12" worth in all. They didn't even clean the area underneath, so it peeled up quite easily. Considering they charged me $8 for a full tube of Dicor and $50 in labor, I definitely did not get my money's worth. I put Eternabond over both the front and rear end cap seams. Hopefully, that will eliminate the leaks.

NCHornet1

Mt. Airy, NC.

Senior Member

Joined: 05/17/2003

View Profile

Offline
Posted: 06/30/08 04:18am Link  |  Quote  |  Print  |  Notify Moderator

Most RV's come with 10-12 year warranties on the roof. Have you checked your paperwork?

NCH


2000 Ford F350 4X4 PSD,CC, DRW
4:10's, BTM Muffler, Isspro Gauges,
Coolant Filter,CCV Mod
FTVB , Ford AIS
6.0 Cooler,SCT2 W/DP's 40 tow & 80 econo,Zoodad mod
2005 Keystone Hornet 30BHSS
Reese Dual Cam
Family of 4 saved by Grace!!!
MY TRUCK
OUR TRAILER


floridacamper

Florida/Georgia Line

Senior Member

Joined: 03/25/2002

View Profile


Posted: 06/30/08 08:49am Link  |  Quote  |  Print  |  Notify Moderator

NCHornet1 wrote:

Most RV's come with 10-12 year warranties on the roof. Have you checked your paperwork?

NCH


That does not cover leaks. The 10 to 12 year roof warranties only covers the (EDM) rubber itself. If it starts to deteriorate then you have a claim. If it comes unglued from your unit, you still don’t have a claim. If it blows off going down the road, you still don’t have a claim. If it caves in while sitting in your driveway, you still don’t have a claim. Basically the long term roof warranty is a joke. They know the EDM or vinyl will not rot in that length of time so they throw that in.

Been there, done that


CLICK HERE FOR PHOTO ALBUM

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 

Open Roads Forum  >  General RVing Issues

 > First the Roof, now Side Delamination


Search:   Advanced Search

Search only in General RVing Issues


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:

© 2008 Motorhome Magazine | Terms & Conditions | PRIVACY POLICY | YOUR PRIVACY RIGHTS