bluearc

ak

New Member

Joined: 08/02/2008

View Profile

Offline
|
Is it ok to leave the bedliner in or should I remove it before I put the TC in. thanks
2001 F250 4x4 5.4 eng.
1995 Coachman
|
Chevinator

Keizer, OR

Full Member

Joined: 02/03/2008

View Profile

Offline
|
If its a plastic liner you would want to remove it. It makes the surface too slick and the camper would shift around alot. Most folks on this forum use rubber mats to get the camper to "stick" to the bed. I personally just have the line-x coating on my bed and the camper seems to stay in place.
C
2006 Chev 2500HD Ext Cab 6-0hh gas 2007 Apache Chief 10.55SS Polar Cub EU2000i Supersprings Superhitch Torklifts
|
hotvet67

michigan

Senior Member

Joined: 05/06/2006

View Profile

Offline
|
You could cut out both sides and the front of the plastic liner and install a 1 / 2 " thick rubber liner on bed floor.
The rubber will hold the plastic in place and still protect the front and side paint of the box , it looks better on my truck to have the bed all black - white truck.
2004 Lance 845
2006 F350 PSD 4X4 SWB 20" Fact. Wheels
1967 corvette drag car
|
Stim

NE Florida

Full Member

Joined: 05/23/2007

View Profile

Offline
|
I bought my new TC about a month ago and brought it 215 miles home with the bedliner in the truck with no problems. Mine is 2004 Chevy with factory bedliner. My bedliner fits very well and dosen't move around like some do. I told the dealer I didn't want the bedliner when I bought the truck new so they gave it to me.
I might take the liner out just to see the difference, the liner will slip in or out easily.
|
FF1063

LI, NY

Senior Member

Joined: 08/04/2004

View Profile

|
.
* This post was
edited 10/15/08 06:21pm by FF1063 *
|
|
|
Karic

Victoria BC, Canada

Full Member

Joined: 08/08/2003

View Profile

Offline
|
Plastic = Bad
Rubber = Good
Ventilated Rubber = Very Good
'03 F350 SD XLT Supercab Dually, V10, Auto, 3.73
'02 Adventurer 90RDS
'06 Sea Ray 215 Weekender
|
Steve_in_29

29 Palms (SEMPER FI), CA 92277

Senior Member

Joined: 01/08/2004

View Profile

|
The plastic bed-liners are rather slick and tend to allow for more movement of the TC then most people are comfortable with. A rubber mat (of what ever type) seems to be the preferred base with many (myself included) using Line-X or other spray-on, bed-liner to boot.
2007 F350,SC,LB,4x4,6.0/Auto,35" tires,16.5 Warn,Buckstop bumpers
2007 Outfitter Apex9.5,270W solar,SolarBoost2000e,2 H2K's,2KW inverter,2 20lb LP on slide out tray,4 Lifeline AGM bats,Tundra fridge
95 Bounder 28' ClassA sold
91 Jamboree 21' ClassC sold
|
trails2004

Wyoming

Senior Member

Joined: 07/19/2007

View Profile

|
Karic wrote: Plastic = Bad
Rubber = Good
Ventilated Rubber = Very Good
Ventilated?? oh do tell
2002 Dodge Ram 2500 SLT 4x4-AFE Cold Air,4"Exhaust,Toyos,Ranchos,Dual Air III- Firestones 2004 Hallmark Cuchara XL 9.5 w/Carbon Fiber Roof, WFCO 9845,Xantrex XBM,Honda 2000,1997 Grumman GV19TC- Crew Wifey,(Odin,Bridger & Sam,Wirehairs)
|
Falcongunner

DFW

New Member

Joined: 06/16/2008

View Profile

Offline
|
Can one use a rubber mat on top of the bed liner or is the problem still the same?
Wayne in North Texas
Ford F250, regular cab,5.4 gas, overload springs, Air lift bags, 265-75-16E tires, 4.10 Traclock, 1989 Pilgrim Camper.
|
Dually

FL USA

Senior Member

Joined: 09/17/2001

View Profile

Offline
|
I have never had a problem with my plastic bed liner and camper combo in over 6 years of use. Your results may vary.
97 C3500 CC DRW 7.4
92 Starcraft LeisueStar 951
Northeast Florida Camping Club
|
|
|