kwlincoln
The Woodlands, TX
Senior Member
Joined: 03/25/2006
View Profile
 Offline
|
I need help! (or pictures of yours). I installed the top awning rail and the top mounts on the side/corner of the camper. The instructions clearly state the the 4 side mounts must be one over the other, not installing the top ones on the overhang.
Here's my question - The top mounts are at the top of my door. The directions say to mount the bottom mounts 20" below that. That puts the bottom mount below my chin! Will I still be able to stand under the awning with the bottom mount that low? How did I go wrong? The top mounts look exactly like the instruction manual and the pictures online. I can't tell where the bottom mount is based on the pictures on the company's website. Does anyone have pictures of where theirs is mounted?
I'M AT A STANDSTILL AND WON'T PUT ANY MORE HOLES IN MY CAMPER UNTIL THE GREAT FOLKS OF RV.NET BAIL ME OUT!
|
Al/Reeni
Ft Myers, Fl
Senior Member
Joined: 02/02/2006
View Profile
Offline
|
I really hope this works, as I'm alot better at posting pictures than doing links, but here's a
Link To Photos of how I did the awning on my Rage'n. The rear facia created some obstacles, but it came out great.
Good luck,
Al
Well, it appears photobucket needs a password and since I can't post it here (even though it's a "view only" password) I'll PM you with it.
BTW, the photos on the album are kinda in reverse order, so you'll have to go through them in reverse.
|
kwlincoln
The Woodlands, TX
Senior Member
Joined: 03/25/2006
View Profile
Offline
|
PERFECT!! THANK YOU!!
I was concerned that the brackets were in the wrong place on mine. I'm on track and will finish drilling my holes now that I know they will be in the right place!
|
|
|
