| |
Subject |
Author |
Date Posted |
Forum
|
 |
RE: Slide out issue on my Mountaineer 5er
Will,
It sounds like we have the same problem for sure. How easy of a project is this for a do-it-yourselfer?
Thanks,
Mark
|
mdgibbs88
|
03/23/09 06:48pm |
Fifth-Wheels
|
|
RE: Slide out issue on my Mountaineer 5er
sounds to mee that it's likely to be your pump . Check your fluid level in it . It is cutting off for some reason. It could be drawing too much amperage and the relay is cutting off and then re-setting after it cools a little- that would also be a good place to check ( and likely to be the least expensive too )
Thanks that is a great place to start. I will check that out this weekend and post my findings.
|
mdgibbs88
|
03/23/09 09:30am |
Fifth-Wheels
|
|
Slide out issue on my Mountaineer 5er
I have a 2007 Mountaineer Montana edition with 3 slide outs. There is only one control for all 3 slides and when I push the button the bedroom slideout goes almost completely out then the living room starts to move, and the motors stop running. I have to just slightly move the the slides back in and then I can start going out again. I have to repeat the process 2 or 3 or 4 times until all of the slides extend.
Should I start my troublehooting with the button or does it sound like some other problem. I am not very experienced with this kind of stuff, but my unit is in a perm spot, and I know it will cost an arm and a leg to get someone out to look at it.
Thanks
|
mdgibbs88
|
03/23/09 08:43am |
Fifth-Wheels
|
|
